Endosan Safety Data Sheets
Use Biocides safely. Always read the label.
EndoSan 3 Ready to use Disinfectant
We advocate cleaning and then disinfecting, using our EndoSan 3 Ready to Use disinfectant. We recommend, spraying and leaving, washing or submerging items in our disinfectant for up to 1 Hour.
- Building/stable disinfection – spray and leave
- Lorries and trailers – spray and leave
- Buckets and yard equipment – wash in diluted EndoSan or spray and leave
- Boot dip buckets – use or ready to use 3% disinfectant.
- Washing machine, – standard household washing machines 300ml in the soap draw
- Use through fogging or misting equipment and knapsack sprayers – follow instructions for the machine, use our 3% ready to use and wear PPE (goggles, mask)
For more information on areas for application and Instructions for use, please visit, the relevant animal pages on our website.
View the Endosan 3 Safety Data by clicking above
EndoSan 8 Water Treatment
Using our EndoSan 8 as a water treatment, how to calculate the volume of your trough:
Volume = length x width x height, (in cm) divide your answer by 1000 to get the volume in Litres!
Instructions for use, for best results:
- Clean your trough
- Spray your trough inside and out with EndoSan 3
- Leave for 60 minutes
- Refill your trough
- Add EndoSan 8 water treatment at a rate of 50ppm/62,5ml per 100L as it fills so that it mixes well. Visit our online dosing calculator.
- Wear PPE (gloves and goggles) to add EndoSan 8 to your water
- Do an initial test with a test strip once the tank has filled.
- Check and test again 2 hours later
- Dosage levels should sit at 50ppm (colours on the test strip match the colours on tub)
How often you add EndoSan 8 water treatment will depend on, the number of animals drinking from the trough, the weather, the hotter it is the more it will need doing and whether your trough is in direct sunlight or shade. Debris will still need removing from your troughs. Use the 0-100ppm test strips to maintain the EndoSan 8 levels in your troughs at 50ppm.
AREAS FOR APPLICATION:
Water troughs, water buckets, water containers, horse box water tanks, rainwater harvesting tanks, well water.
View the Endosan 8 Safety Data by clicking above
EndoSan 20 Concentrate Disinfectant
DILUTE before use!
Dilute EndoSan 20 into a clean container that has not held any previous chemicals. Dilute at a a ratio of 1:6, 1 part EndoSan 20 to 6 parts water. Wear PPE (gloves and goggles) to dilute.
We advocate cleaning and then disinfecting, using our diluted EndoSan 20 disinfectant. We recommend, spraying and leaving, washing or submerging items in our diluted disinfectant for up to 1 Hour.
- Building/stable disinfection – spray and leave
- Lorries and trailers – spray and leave
- Buckets and yard equipment – wash in diluted EndoSan or spray and leave
- Boot dip buckets – use or ready to use 3% disinfectant.
- Washing machine, – standard household washing machines 300ml in the soap draw
- Use through fogging or misting equipment and knapsack sprayers – follow instructions for the machine, use our 3% ready to use and wear PPE (goggles, mask)
For more information on areas for application and Instructions for use, please visit, the relevant animal pages on our website.
View the Endosan 20 Safety Data by clicking above
Explore more on Science and Biosecurity
Want to know more about the science and biosecurity behind our products? Head to the button below to find out more.